Find PLG Continuous Plate Dryer, PLG Plate Dryer, Efficient Disc Continuous Plate Drier on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Sodium Benzene Sulfonate Continuous Plate Dryer
Home > Products > Drying Series > Plate Dryer > Sodium Benzene Sulfonate Continuous Plate Dryer

Sodium Benzene Sulfonate Continuous Plate Dryer

    Payment Type: T/T,Paypal
    Incoterm: FOB
    Min. Order: 1 Bag/Bags
    Delivery Time: 30 Days
    Packaging: wooden box
    Productivity: 1~1000
    Brand: suli
    Transportation: Ocean
    Place of Origin: changzhou,jiangsu
    Supply Ability: 1-1000
    Certificate: ISO9001
    Port: Shanghai

Basic Info

Model No.: PLG

Product Description

Su li dry professional production PLG Continuous Plate Dryer.

PLG Continuous Plate Dryer Principle
It is an innovation horizontal batch-type vacuum dryer . The moister of wet material will be evaporated by heat transmission. The stirrer with squeegee will remove material on hot surface and move in the container to form cycle flow. The evaporated moisture will be pumped by vacuum pump.
Wet materials are fed continuously to the top drying layer in the dryer. They will be turned and stirred continuously by harrows when the harrow's arm rotates, the material flows through the surface of the drying plate along the exponential helical line. On the small drying plate the material will be moved to its exterior edge and drop down to the exterior edge of the large drying plate underneath, and will then be moved inward and drop down from its central hole to the small drying plate on the next layer. Both small and large drying plates are arranged alternately so as materials can go through the whole dryer continuously. The heating media, which could be saturated steam, hot water or thermal oil will be led into hollow drying plates from one end to other end of the dryer. The dried product will drop from the last layer of the drying plate to the bottom layer of the smell body, and will be moved by harrows to the discharge port. The moisture exhausts from materials and will be removed from the moist discharge port on the top cover, or sucked out by the vacuum pump on the top cover for vacuum-type plate dryer. The dried product discharged from the bottom layer can be packed directly. The drying capability can be raised up if equipped with supplementary devices such as finned heater, condenser for solvent recovery, bag dust filter, return and mix mechanism for dried materials and suction fan etc. solvent in those paste state and heat sensitive materials can be easily recovered, and thermal decomposition and reaction can be also carried out.

Sodium Benzene Sulfonate Continuous Plate Dryer

Performance characteristics
(1) Easy control and strong applicability:

The drying process is optimized by adjusting the thickness of the material layer, the spindle speed, the number of cymbals, the type and size of the blister leaf.
◎ Each layer of drying plate can be heated or cooled by entering the heat medium or the cold medium separately. The temperature control of the material is accurate and easy.
◎ The residence time of the material can be precisely adjusted.
◎ The flow direction of the material is single and there is no back mixing phenomenon. The drying is uniform, the quality is stable, and no mixing is required.
(II) Easy operation and easy operation
◎Dryer driving and parking operations are very simple.
◎ After the feed is stopped, the transport of the material scale leaves the material in the dryer quickly.
◎ Through a special large inspection door mirror, the inside of the equipment can be carefully cleaned and observed.
(3) Low energy consumption
◎ The material layer is thin, the spindle speed is low, and the material transfer system requires less power and less power consumption.
◎ Drying with conductive heat, high thermal efficiency, low energy consumption.
(4) The operating environment is good, the solvent can be recovered, and the dust emission meets the requirements.
◎ Normal pressure type: Due to the low air velocity in the equipment and the high and low humidity distribution inside the equipment, it is difficult for dust to float to the top of the equipment, so the top moisture outlet The exhaust gas contains almost no dust.
◎ Closed type: Equipped with a solvent recovery device, it can conveniently recover the organic solvent contained in the carrier gas. The solvent recovery device is simple and the recovery rate is high. For materials that are flammable, explosive, toxic, and easily oxidized, nitrogen can be used as a carrier gas to carry out closed-circuit circulation for safe operation. Especially suitable for drying flammable, explosive and toxic materials.
◎Vacuum type: The disc dryer operates under vacuum, especially suitable for the drying of heat-sensitive materials.
(5) Easy installation and small floor space
◎ The entire dryer is shipped and the entire transport is completed. It is only necessary to lift the dryer in place and the installation and positioning are very easy.
◎ Due to the dry disk layout and vertical installation, even the dry area is large and the floor space is small.

Technical characteristics
(a) drying plate
◎ design pressure: generally 0.4MPa, up to 1.6MPa.
◎ maximum use pressure: generally ≤ 0.4MPa, up to 1.6MPa.
◎ Heating medium: Steam, hot water, heat transfer oil, hot water heating at 100°C, 100°C to 150°C, saturated steam or superheated steam at ≤0.4MPa, and heat transfer oil at 150°C to 320°C. Heating, >320 °C can be used when electricity, thermal oil, molten salt and other heating methods.
(b) material transfer system
◎ spindle speed: 1 to 10 minutes, electromagnetic or frequency conversion stepless speed regulation.
◎ Arm: There are 2 to 8 arm arms fixed to the main shaft on each drying plate.
◎ leaves: spliced on the arm, can keep in contact with the surface floating, there are many forms.
◎Rolling and Rolling: For the materials that are easy to agglomerate and need to be crushed, adding a roll in place can strengthen the heat transfer and drying process.
(C) The shell has three types of normal pressure, airtight, and vacuum.
◎ Atmospheric pressure type: Cylindrical or octagonal prism type, there are two types of integral and split structure. The heating medium inlet and outlet main ducts may be inside or outside the housing.
◎Closed type: cylindrical shell, can withstand 5Kpa internal pressure, heating medium inlet and outlet main pipeline can be in the shell, but also outside the shell.
◎ Vacuum type: cylindrical shell, design pressure is 0.1Mpa, heating medium inlet and outlet main pipelines are in the shell.
(d) Air heaters
are generally used with large evaporation to enhance drying efficiency.

Adaptation materials
Dry pyrolysis Combustion cooling Reaction Sublimation
Organic chemical products, inorganic chemical products, medicine, food, feed, fertilizer
Sodium Benzene Sulfonate Continuous Plate Dryer
Sodium Benzene Sulfonate Continuous Plate Dryer

Sodium Benzene Sulfonate Continuous Plate Dryer12

Sodium Benzene Sulfonate Continuous Plate Dryer13

Contact us if you need more details on PLG Continuous Plate Dryer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about PLG Plate Dryer、Efficient Disc Continuous Plate Drier. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Drying Series > Plate Dryer