TF TANK MOUNTED SUCTION OIL FILTER SERIES TF-100

 

TF TANK MOUNTED SUCTION FILTER SERIES

 

INTRODUCTION

The TF-series filters can be installed on the top, at the side or in the bottom of the tank. 

There is a check valve inside the filter, during maintenance, when filter element is withdrawn 

for washing, the check valve will close automatically to stop oil flowing out from the tank.

A vacuum indicator in the filter gives signals when the pressure drop across the element 

reaches 0.018MPa showing that the filter shall be cleaned. If no maintenance is done, 

as the pressure drop rises to 0.02MPa, the by-

pass valve will open to allow oil flowing into pump. 

This kind of filter can be installed at inlet port of the pump, 

in order to protect  the pump and other component. 

This filter can help to keep hydraulic system clean and easy to use.

 

TF-25×L-Y/C TFX-25×

TF-40×L-Y/C TFX-40×

TF-63×L-Y/C TFX-63×

TF-100×L-Y/C TFX-100×

TF-160×L-Y/C TFX-160×

TF-250×L-Y/C TFX-250×

TF-400×L-Y/C TFX-400×

TF-630×L-Y/C TFX-630×

TF-800×L-Y/C TFX-800×

TF-1000×L-Y/C TFX-1000×

TF-1300×L-Y/C TFX-1300×

Contact us if you need more details on Suction Oil Filter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about SUCTION STRAINER、OIL STRAINER. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Suction Oil Filter