NJU TANK MOUNTED SUCTION OIL FILTER NJU-800

DEMALONG SUPPLY NJU TANK MOUNTED SUCTION FILTER SERIES

INTRODUCTION

 

The NJU-series filters are widely used in hydraulic systems. The filter can be installed on the top or at the side of the tank. The filter head should be out of tank and the filter bowl should be inserted from side or top of the tank into oil. The outlet 

is connected with pump outlet.25~160 L/min type has combine removable flange, 

the working height can be adjusted in order to make the tank totally obdurate and that way can prevent the contamination from getting into the tank. During maintenance, open the filter cover, take out the filter element together with sludge cup and

clean them. A by-pass valve and a vacuum are incorporated with the filter.  When 

the pressure drop across the filter element reaches 0.018MPa, the indicator gives 

signals showing maintenance shall be done. If no service is done and as the pressure drop rises to 0.02MPa, the by-pass valve will open to ensure oil flow into pump.

 

NJU-25×L-Y/C UX-25×

NJU-40×L-Y/C UX-40×

NJU-63×L-Y/C UX-63×

NJU-100×L-Y/C UX-100×

NJU-160×L-Y/C UX-160×

NJU-250×L-Y/C UX-250×

NJU-400×L-Y/C UX-400×

NJU-630×L-Y/C UX-630×

NJU-800×L-Y/C UX-800×

Contact us if you need more details on Suction Oil Filter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about SUCTION STRAINER、OIL STRAINER. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Suction Oil Filter